Most Awnings Can Be Power Washed Using Low-Pressure Settings

Low-pressure washing cleans dirt, mold, and pollen off awnings. It does not rip seams or fade colors. We use 500–800 PSI with a wide fan tip. This gentle spray cleans canvas, vinyl, and aluminum awnings safely.

Orlando gets a lot of rain and humidity. This makes mold grow faster on shaded awnings. Properties in Winter Park and Baldwin Park see more buildup. Trees and moisture create perfect conditions for mold. Low pressure cleans awnings without pushing water through seams.

We test every awning first on a hidden spot. This makes sure the material can handle pressure and soap. Your awning gets clean and lasts longer.

Fabric Awnings in Orlando Require Pre-Treatment Before Power Washing

Pre-treatment makes stains easier to remove. We spray biodegradable cleaner on canvas or acrylic fabric awnings. We let it sit for 10 minutes. The cleaner breaks down mildew, tree sap, and bird droppings. Then we rinse it off.

Live oak trees in Orlando drop sap and pollen. These stick to fabric awnings in spring and fall. The stains set fast in heat and humidity. Pre-treatment lifts them without hard scrubbing during pressure washing in Orlando.

Skipping this step means you need higher pressure. You may need to spray the same spot many times. Both ways shorten awning life and fade colors. We treat first, then rinse once for best results.

Aluminum Awnings Handle Higher Pressure Than Fabric or Canvas

Metal awnings can take 1,200–1,500 PSI. This removes rust and deep dirt quickly. We change pressure based on how old the aluminum is. Higher pressure strips away years of buildup. It does not bend or dent the panels. Aluminum awnings near Lake Eola and downtown Orlando get dirty fast. Car exhaust and lake moisture create algae. This makes a dark coating that low pressure cannot remove. Metal surfaces can handle the force needed. Commercial buildings and older homes need this service most. We clean aluminum awnings over storefronts, windows, and loading docks along with our sidewalk pressure washing service. The awning looks bright and professional. It stays clean for months.

Power Washing Removes Mold, Algae, and Bird Droppings From Awnings

Pressure washing kills mold and strips algae. We do not use harsh chemicals. We focus on awnings over patios, storefronts, and windows. Shade and dampness make mold grow in these spots. Water pressure breaks down the growth and washes it away.

Summer humidity in Orlando keeps awnings damp for hours. This creates perfect mold conditions in Thornton Park and College Park. Tree cover blocks airflow in these areas. According to the Centers for Disease Control and Prevention, mold grows fast in damp places with poor ventilation. Bird droppings stick to fabric and metal in the heat.

You see results right away after cleaning. Dark streaks disappear and colors look brighter. We rinse well to remove all mold. This stops regrowth for months. Regular washing keeps mold from spreading to walls or windows below.

Avoid Power Washing Torn, Loose, or Sun-Damaged Awning Material

We check your awning before washing. This stops more tearing or damage. We look for frayed edges, loose threads, and brittle fabric. UV rays from the sun cause this damage. Old awnings with visible damage need gentle hand cleaning instead.

Florida sun breaks down awning fabric faster than in other states. Awnings over 10 years old often show sun rot and fading. They have thin spots. Pressure washing these areas pushes water through weak points. It can rip the material.

We tell you up front if your awning cannot handle pressure washing. Hand cleaning or replacement may work better. This honest check saves you money. You avoid costly repairs after a cleaning that makes things worse.

FAQs

Q: Can you power wash an awning in Orlando without damaging it?
Yes, using low pressure at 500–800 PSI protects fabric and seams. We test a hidden section first. This makes sure the material can handle cleaning. This method removes mold and dirt without tearing or fading.

Q: What is the best way to clean a moldy awning in Orlando?
Pre-treat with biodegradable mold cleaner and let it sit 10 minutes. Then rinse with low-pressure water. The cleaner breaks down mold so gentle rinsing removes it. This works on fabric, canvas, and aluminum awnings.

Q: Should I use soap when power washing an awning?
Mild dish soap or awning cleaner lifts dirt and stains well. Do not use bleach on fabric awnings. It weakens fibers and causes fading. We use biodegradable soap that rinses clean.

Q: Where should you not use a pressure washer on an awning?
Avoid torn areas, seams, and any section with sun rot or cracks. Pressure can make existing damage worse. Material can separate. We check your awning before cleaning to find weak spots.

Q: How often should Orlando awnings be power washed?
Every 6–12 months based on shade, tree cover, and mold buildup. Awnings under trees or near water need more cleaning. Regular washing stops permanent stains and makes awnings last longer.

Q: Can aluminum awnings in Orlando be power washed at higher pressure?
Yes, metal awnings handle 1,200–1,500 PSI safely. We use higher pressure to remove rust, exhaust film, and algae. Aluminum surfaces can take the force needed for deep cleaning.

Commercial Services